Note that this base is not like the base on an infant seat: you are not meant to remove and replace the seat once it’s fully installed. To place the seat onto the base, line up the white arrow on the base with the red arrow on the seat, and it will click into place. When in doubt, contact a Child Passenger Safety Technician or Evenflo’s customer service to help you. This is necessary in the captain’s seats of my Odyssey. You may need to shorten your vehicle’s buckle stalk by twisting clockwise up to three full times. The biggest difficulty for a seatbelt installation in some vehicles will be if your buckle stalk is long and the buckle itself ends up in the belt path, too close to the belt tensioner. Seatbelt Installation Demo Revolve 360 seatbelt install demo – review link in profile #cpst #carseatsafety #evenflorevolve360 #parentsoftiktok ♬ original sound – Car Seat Cubs / Maman Loup The top tether is located on the base, allowing you to rotate the seat between modes without having to detach and reattach the tether. Note that the top tether must always be secured. You still need to lock the vehicle seat belt, as the LockStrong is not a lock-off. When securing the base with the vehicle seat belt, remove slack and close the LockStrong, ensuring the indicator turns green. The seat features a seat belt tensioner, which is called the LockStrong. The seat can be installed using lower anchors up to a child weight of 35 lb (16 kg), but the recommended install method is by seat belt, which I would also recommend when using the seat for multiple children. Lower Anchor Install Demo: Revolve 360 install – full review linked in profile #cpst #carseatsafety #evenflorevolve360 #parentsoftiktok ♬ original sound – Car Seat Cubs / Maman Loup The base must sit flat on the vehicle seat and firmly up against the seatback. The seat itself can be removed from the base, and to install you must install the base first. If you have a tight back seat, don’t rule the Revolve out, but I wouldn’t commit without testing it out to ensure you can make use of the rotation. They are massive and will make the fit for tiny babies very awkward.īesides the comfort and safety of the driver or front seat passenger, the front-to-back footprint of the Revolve is also relevant because you need enough space between the car seat and the vehicle seatback in front of it in order to make use of the rotational function. The built-in, non-removable harness pads are thick and wide.My 6-year-old is skinny, so she fits well, but a child with a broader build would be very squished, especially in the shoulders. The interior of the seat is quite narrow.It will keep even very tall kids harnessed until booster readiness. In forward-facing mode, the Revolve has an impressive harness height (19”/48 cm).Age 2 is the minimum age for switching to forward-facing mode, but keeping children rear-facing for longer is the goal. My taller twin, at 37” (94 cm) and 34 lb (15.5 kg), did not have the required 1” (2.5 cm) of space between the top of his head and the top of the headrest at just over 3 years old. Taller-than-average kiddos run the risk of outgrowing the Revolve in rear-facing mode sooner than desired.Will the Evenflo Revolve 360 work for your child? In forward-facing mode, non-removable headrests that lean forward may get in the way: if you cannot remove your vehicle’s headrests, test the Revolve in forward-facing mode before you commit.This can be limiting in some vehicles depending on where you plan to put the seat. The Revolve must be installed in a location with an approved top tether anchor, even if only being used rear-facing. Also note that if you need three car seats across one row, you will not be able to rotate the Revolve with another seat right next to it.
0 Comments
Leave a Reply. |